Attic Mold Removal – How to Get Rid of Mold in Your Attic



When you’re selling your home, attic mold removal is a must. If there’s any evidence of moisture in the attic, a buyer might walk away. If a buyer sees mold, they will want to get it treated before closing, or risk having to lower your asking price. Banks, too, require attic mold removal before they’ll approve your loan. Mold in the attic is a serious problem, and if you can’t afford to fix it yourself, it’s time to find a professional.

Excess moisture in the attic


Most attic mold cases can be traced back to excessive moisture. This moisture is often caused by roof leaks and condensation. However, there are several causes of attic moisture. Here are some tips to avoid mold growth:


If your attic has poor insulation and air leaks, then you can try using a thermal camera to inspect the attic area. However, you must be extremely careful – don’t try this unless you have a solid understanding of safety in attics. If you don’t know what you’re doing, you may fall through the ceiling. To stop the moisture, you should reroute the vents. This will prevent future water damage.

Another major cause of attic moisture is excessive air movement. Warm moist air rises into the attic and mixes with cooler air below the roof deck. The condensation condenses onto the cold gable wall, where mold can grow. Excessive air movement is the main cause of attic mold problems. If you’re not sure what is causing your problem, here’s an illustration.


Once you’ve found out the source of the problem, the next step is to find a remediation company. Make sure you find an environmentally-friendly company. Some contractors inflate their prices dramatically and assume that you’ll never get a competitive bid. You’ll save money and energy by hiring a company that uses environmentally friendly products. You should also ask about the cost of encapsulation compared to sanding.

Natural treatments for attic mold


To eliminate attic mold naturally, seal any cracks in the ceiling. Use fire-rated spray foam to seal all small spaces. Cracks can occur in attic ventilation, light fixtures, and drywall joints. Pipes and plumbing stacks can also cause cracks. The easiest way to determine which areas need sealing is to look for mold. For instance, if you see mold on the roof decking, you likely have air leaks beneath the decking.


White vinegar is another natural treatment that will remove mold from the attic. White vinegar contains antimicrobial properties that can kill the mold spores. Simply mix one half vinegar with half water and spray the affected area with the mixture. If you notice mold in a particularly hard-to-reach area, you may need a stronger dilution. Either way, vinegar will kill the mold and prevent it from growing again.


Although a home owner may be relieved to know that the attic is free of mold, the problem remains. Mold grows in moist environments, deteriorating structural roof elements and attic sheathing. Not only are molds unsightly, but they also cause a lot of unnecessary pain and expense. As a homeowner, you probably want to avoid paying a plumber to remove a moldy attic until you are certain that you’ve had enough to make the decision.

Cost of attic mold removal


If your attic has become infested with mold, it may be time to get it cleaned out. Before you begin the process, you should know how much mold removal will cost you. The amount of square feet infested will determine the cost of remediation. Additionally, it is important to note that if you notice raised shingles on the ceiling, it may indicate the presence of mold. Because the attic is typically an unused space, it will be prone to excessive dampness.


The most common symptoms of attic mold are dark stains on wood or a musty odor. The presence of these stains is an early warning sign that mold has grown in the area. In addition, if the mold is spreading throughout the house, it can cause other problems such as poor indoor air quality, discomfort and even serious medical conditions. Mold must be cleaned immediately when you notice these symptoms, so call a mold inspection expert as soon as possible.


The cost of mold remediation can vary greatly between companies, so make sure to shop around for quotes. Keep in mind that you should always budget for 7 to 15 percent more than the cost of the mold removal calculator suggests. But be sure to call a contractor as soon as you notice any signs of mold. By hiring a Clean First CA professional, you can ensure that the problem won’t be left untreated and won’t come back with dangerous side effects.